Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
PRODUCT USER SAFETY INSTRUCTIONS CONTINUED
Use only authentic RPB
equipment, including the use of counterfeit or non-RPB
and could reduce the filtration capabilities. Do not modify or alter any part of this product.
VERIFY THAT YOU HAVE THE APPROPRIATE EQUIPMENT FOR YOUR ACTIVITY
Verify that the Radex
workplace safety program, respiratory protection program, and standards and regulations for your
activity or industry. (See PROTECTION PROVIDED AND LIMITATIONS, page 4.)
BEFORE CONNECTING A RESPIRATOR TO THE RADEX
Verify airborne contaminants are within recommended limits for respirator use:
Determine the type and level of contamination. Verify that airborne contaminant
concentrations do not exceed those allowed by applicable regulations and standards for
supplied air respirators.
Make sure the work area is ventilated, and the work area and the breathing air supply are
monitored:
Make sure that the area is well ventilated and that regular air samples are taken to
confirm the atmosphere stays within the levels recommended by OSHA, EN, AS/NZS
and other governing bodies and standards. It is recommended to use a GX4
for monitoring breathing air supply coming from the Radex
Monitor Instruction Manual.
If you have any questions, ask your employer.
SETUP AND CARE
Install the Radex
140°F (-10°C to +60°C) to protect the unit and to keep the air supply below 140°F (60°C). Always
mount the Radex
the ground to prevent it from tipping over or mount it on a sturdy wall.
10
RADEX AIRLINE FILTER
brand parts and components. Using incomplete or inappropriate
®
provides appropriate protection for your activity. As applicable, check your
®
in a location that is within the recommended temperature range of 14°F to
®
Airline Filter on a secure level surface. It is recommended to bolt the stand to
®
parts, can result in inadequate protection
®
:
®
. Follow the GX4
®
Gas Monitor
®
Gas
®
Advertenties
Inhoudsopgave
