Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SETUP AND CARE CONTINUED
04-900 ASSEMBLY - 2 OUTLET MANIFOLD
FIGURE 2.1
To assemble the pressure regulator, thread
the pressure gauge into the body and
tighten using an 11mm wrench.
FIGURE 2.3
Fit the complete regulator assembly onto
the top of the Radex
a 17mm wrench.
WARNING
Airline Filter from over pressurizing. If the hole is plugged with something other than the
pressure relief valve, excess pressure could cause the vessel to explode.
12
RADEX AIRLINE FILTER
Airline Filter lid using
®
The pressure relief valve must be connected to protect the Radex
FIGURE 2.2
Connect the quick disconnect coupler and
brass cap to the 3/8" tee into the top of the
pressure regulator and tighten. Tighten the
regulator assembly before mounting onto
the Radex
Airline Filter. Use thread sealant
®
on all fittings.
FIGURE 2.4
Fit the pressure relief valve and tighten.
Advertenties
Inhoudsopgave
