Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6
OPERATION
6.4
STARTING/STOPPING ENGINE ______________________________________________
!
CAUTION
Always start and stop the engine when the mower is
on level ground. Keep feet away from blade when
starting engine.
Starting
1. Check oil level and fuel supply then open fuel valve
lever (F).
2. Move the choke lever (E) to the CLOSED position.
3. Set engine switch (D) to ON.
4. Make certain the O.P.C. bail (C) is disengaged and
the parking brake (A) is engaged.
5. Select desired position for traction clutch lever (G)
and reel clutch lever (H).
To cut - engage traction clutch (G
(H
).
1
To transport - engage traction clutch (G
disengage reel clutch (H
!
WARNING
To prevent bodily injury or property damage, never
engage the traction or reel clutch lever while the
engine is running or the O.P.C. bail is engaged.
6. Start the engine. Do not allow the cord to snap back
into the starter. Do not tilt the mower back when
starting.
7. When engine starts, move choke lever (F) to the
OPEN
position.
required while engine is cold.
8. Allow engine to warm up gradually.
Stopping
1. To stop the engine, release the O.P.C. bail (C), and
set engine switch (D) to OFF position. Close fuel
shutoff valve (F).
2. Engage parking brake (A).
20
) and reel clutch
1
).
2
Intermittent
choking
) and
1
A
may
be
H
1
H
2
D
E
OFF
F
B
P
N
D
G
H
Figure 6A
C
Figure 6B
G
1
G
2
Figure 6C
Advertenties
Hoofdstukken
Inhoudsopgave
