Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
IMPORTANT COMPONENTS
1. electrical cable
2. hanging chain
3. hanging eye for heater
4. control box
5. power switches & indicator light
6. protective cover
7. reflective screen
8. carbon lamps
9. grille
INSTALLATION
Mounting hardware included:
-
key-bolt with hanging eye
- Standard attachment chain (40 cm.) with screw locking and ring
- Additional security chain (25 cm.)
- 2 karabiner hooks
- 3 tie wraps
The party-tent heater must be hung so that there is 40 cm of free space between the control box
and any ceiling, tent canvas etc. The hanging chain measures 40 cm.
Additionally, at least 50 cm of space must be left at the sides, between the device and any side
walls, tent canvas and other objects. There must also be at least 1.80 m between the ground
and the underside of the party tent heater. The party-tent heater can never be hung on a hook
in the wall as it could hang at a slant!
There are two methods of hanging:
1. On the ceiling
2. On a frame (e.g. a tent frame)
1. Hanging on the ceiling
The party-tent heater must be hung on a concrete ceiling. Never hang it on a ceiling made of
wood, plaster or any other material! The attachment materials and fire safety measures are not
suitable for this type of installation.
Seek a location in the ceiling that fulfils all of the requirements;
Drill a sufficiently deep hole with a diameter of 8 mm;
Knock the key-bolt with hanging eye into the hole; secure it by
turning clockwise and check that the hanging eye is screwed
into the key-bolt properly or that the bolt and eye is firmly
attached. Ensure that the attachment kit can bear the weight of
at least 10 kg.
Attach the attachment chain with the screw locking at the Partytent heater.
Hook a karabiner hook at the ring of the attachment chain
9
Advertenties
Inhoudsopgave
