Download Inhoudsopgave Inhoud Print deze pagina

Fitting Grease Filters; Troubleshooting; Malfunctions; Disposal - Junker JD66SF50 Gebruikershandleiding En Installatie-Instructies

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Requirement: The grease filters have been removed.
→ "Removing the grease filter", Page 20
Observe the information regarding the cleaning
1.
agents.
Place the grease filters loosely into the dishwasher.
2.
Do not clean heavily soiled grease filters with
utensils.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from customer service
or the online shop.
Start the dishwasher.
3.
Select a temperature of no more than 70 °C.

Troubleshooting

9  Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
If the appliance is defective, call Customer Service.
→ "Customer Service", Page 22
9.1 Malfunctions
Fault
The appliance is not
working.
The LED lighting
does not work.
The button illumina-
tion does not work.

Disposal

10  Disposal
10.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.
Unplug the appliance from the mains.
1.
Cut through the power cord.
2.
Dispose of the appliance in an environmentally
3.
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
There has been a power cut.
Check whether the lighting in your room or other appliances are working.
Different causes are possible.
Defective LED lights may be replaced by the manufacturer, their customer service or a
qualified technician (electrician) only.
Call
→ "Customer Service", Page 22.
The control unit is faulty.
Call
→ "Customer Service", Page 22.
Allow the grease filters to drain.
4.
8.7 Fitting grease filters
ATTENTION!
Falling grease filters may damage the hob below.
Grip below the grease filter with one hand.
Fit the grease filters.
1.
Fold the grease filters upwards and engage the
2.
locks.
Make sure that the locks engage.
3.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
Only use genuine spare parts when repairing the
appliance.
If the power cord of this appliance is damaged, it
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
This appliance is labelled in accord-
ance with European Directive
2012/19/EU concerning used elec-
trical and electronic appliances
(waste electrical and electronic equip-
ment - WEEE).
The guideline determines the frame-
work for the return and recycling of
used appliances as applicable
throughout the EU.
Troubleshooting en
21

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Jd69sf50

Inhoudsopgave