Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
NOTE! This controller has an internal memory so it remembers the last temperature
setting and activates it as soon as the controller is used again.
SINGLE TEMPERATURE CONTROLLER (TCSP)
This temperature controller can be used with the following products:
•
Inner jacket only.
•
Inner shorts only.
•
Only the socks in combination with a long Y-cable.
These operations can only be performed after correctly connecting a Gerbing
battery connection cable (see battery connection cable manual) or a 12V-DC
plug.
1. Connect the long single cable directly to the battery cable or 12V-DC plug.
2. Connect the short cable directly to the connection plug of a Gerbing inner
jacket, inner trousers or vest.
3. If using the vehicle battery: turn the vehicle on or start the vehicle.
4. The light flashes red, green, blue, orange in succession and then off.
5. Turn on the TCSP by pressing the round button until the light turns blue.
6. Then press the round button until the light turns green, then press it again
until the light turns orange.
7. To reach the hottest setting (red), you need to unlock the TCSP* After this
is done once, when the light is orange, you can press the round button
until it turns red.
8. To deactivate the TCSP, press the round button until the light is off.
*Unlock highest position (once).
•
To turn the TCSP on, press the round button until the light turns blue.
•
Then press the round button until the light turns orange.
•
Then press for about 10 seconds until the light turns red.
•
Press the round button until the junior TCSP is off.
•
Now all four modes can be used, with the following capacity:
Blue:
25%
Green:
50%
Orange:
75%
Red:
100%
NOTE! This controller has an internal memory so it remembers the last temperature
setting and activates it as soon as the controller is used again.
EN
Advertenties
Inhoudsopgave
