Advertenties
Beschikbare talen
Beschikbare talen
5
Functions
5.1
Mode button
To select DC/ACV,OHM/ Diode/Continuity/CAP,
5.2
MIN-/MAX recording button
Press MIN/MAX to enter MIN, MAX Recording mode (manual range only ). Select
the proper range before selecting MIN MAX to ensure that the MIN/MAX reading
will not exceed the testing range. Press once to select MIN. Press again to select
MAX. and press again release MIN/MAX recording function.
5.3
REL button
For DCA Zero & Offset adjustment.
5.4
Data HOLD button
To freeze the LCD meter reading, press the data hold button. The data hold but-
ton is located on the left side of the meter (top button). While data hold is active,
the HOLD display icon appears on the LCD. Press the data hold button again to
return to normal operation.
Note: The HOLD feature will activate when the Backlight is turned on.
Press the HOLD key again to exit Hold.
5.5
Range button
When the meter is first turned on, it automatically goes into AutoRanging. This
automatically selects the best range for the measurements being made and is
generally the best mode for most measurements. For measurement situations
requiring that a range be manually selected, perform the following:
C/
F
o
o
www.nieaf-smitt.com
29
Advertenties
Hoofdstukken
