Advertenties
Beschikbare talen
Beschikbare talen
4.7 Capacitance measurements
WARNING: To avoid electric shock, disconnect power to the unit under
test and discharge all capacitors before taking any capacitance
measurements. Remove the batteries and unplug the line cords..
Set the rotary function switch to the Ω
1.
position
2.
Insert the black test lead banana plug into the
negative (COM) jack
3.
Insert the red test lead banana plug into the positive
(V) jack
4.
Touch the test leads to the capacitor to be tested
5.
Read the capacitance value in the display
4.8
Temperature measurements
WARNING: To avoid electric shock, disconnect both test probes from
any source of voltage before making a
temperature measurement.Set the function
switch to TEMP
1.
Insert the Temperature Probe into the negative
(COM) and the V jacks, making sure to observe
the correct polarity
2.
Select
C or
o
3.
Touch the Temperature Probe head to the part
whose temperature you wish to measure. Keep
the probe touching the part under test until the
reading stabilizes (about 30 seconds).
4.
Read the temperature in the display. The digital
reading will indicate the proper decimal point
and value
F with the MODE button
o
•))) CAP
www.nieaf-smitt.com
27
Advertenties
Hoofdstukken
