Advertenties
Beschikbare talen
Beschikbare talen
4.3 DC/AC voltage measurements
1.
Insert the black test lead into the negative
COM terminal and the red test lead into
the positive V terminal
2.
Set the function switch to the V position
3.
Select AC or DC with the MODE button
4.
Connect the test leads in parallel to the
circuit under test
5.
Read the voltage measurement on the
LCD display
4.4 Frequency/duty cycle measurements (electronic)
1.
Set the rotary function switch to "V" position
2.
Select ACV with the MODE button
3.
Press the Hz/% button to indicate "Hz" in the display
4.
Insert the black lead banana plug into the negative COM jack and the red
test lead banana plug into the positive Hz jack
5.
Touch the test probe tips to the circuit under test
6.
Read the frequency on the display
7.
Press the Hz/% button again to indicate "%" on the display
Read the % of duty cycle on the display.
25
www.nieaf-smitt.com
Advertenties
Hoofdstukken
