Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Niceey AirFryer DE30
4.
Insert the drawer (s) into the chamber (s) (9).
5.
Press the power button (10) to activate the
control panel (1). Setting mode for cooking
zone 1 is called up. ( To switch to cooking
zone 2, press the button 2 (18).
6.
Select a programme (19) and if necessary
adjust the temperature and cooking time
using the buttons ^ and v(11, 16).
7.
If only one drawer is being used, continue
with step 9. If both drawefs have been lled,
set the temperatue and cooking time for
cooking zone 2 in one of the following ways:
a.
To copy the settings from cooking
zone 1 for cooing zone 2, press the
DUAL button (15).
b.
Otherwise use the button 2 to call up
the setting mode for cooking zone 2.
Then choose a programme and make
adjustments if necessary.
8.
If di erent settings have been made for both
cooking zones, but the cooking times should
end simultaneously, press the meal button
(12). Otherwise skip this stop.
9.
Use the START/STOP button (17) to start the
cooking process.
If the MEAL function is activated, the
cooking time starts rst. The other cooking
zone is only activated, accompanied by a
beep, when the remaining cooking times
for both cooking zone are the same
length. Until this point, "hold" appears
on the associated display.
The remaining cooking time can be read o
the display (13 or 14 ) . Once the cooking time
has elapsed, a beep is heard and " End" is
shown.
10.
Pull out the drawer (s) and place down on
a heat-resistant surface. Do not stand on
the device!
11.
Switch o the device using the power
button and pull the mains plug out of the
plug socket.
12.
Remove the food from the drawer (s).
13.
Allow the drawer and the rack to cool
down. Then clean them (see the "cleaning
and storage" chapter).
BRIEFLY PAUSING THE COOKING PROCESS
If the cooking process is to be paused to mix
around or add further ingredients, for
example , simply pull out the drawer (3). The
countdown of the cooking time ( for both
cooking zones if they are synchronized) is
stopped. It resumes after the drawer is
inserted.
Manually stopping a Cooking Zone
To stop the cooking process in one cooking
zone, call up the respective setting mode
using the buttons 1 (20) or 2 (18) and then
press the start/ stop but ton (17). "End"
appears on the corresponding display. The
other cooking zone continues the cooking
process.
ENG
12
Advertenties
Hoofdstukken
Inhoudsopgave
