Advertenties
Beschikbare talen
Beschikbare talen
B
Product usage
•
When the child lock is activated, all the buttons are protected.
•
When you switch off the machine by pressing the «On/Off» button, the child lock is
deactivated.
•
At the end of the program, the child lock is automatically unlocked.
To start the program
•
After selecting your options and adding the washing products to the dispenser drawer,
open the water supply and press the «Start/Pause» button. The screen displays the
progress of the current program with icons going from left to right. It also displays the
remaining time of the program.
To cancel the program or re-select some options
1.
Press the «On/Off» button for 2 seconds to turn off the machine.
2.
Press the «On/Off» button to turn on the machine. Select the new program and options.
3.
Press «Start/Pause» to start the new program without adding additional washing products.
End of the program
•
When the program is finished, the «End» message appears on the display. If no action is
taken within 2 minutes, the machine will automatically turn off.
1.
Press the «On/Off» button for 2 seconds to turn off the machine;
2.
Turn off the tap;
3.
Open the door and take out the clean laundry;
4.
Leave the window slightly open to allow the moisture inside to dissipate.
Reloading during a cycle
If you want to load additional clothing during a wash cycle, press the «Start/Pause» button.
•
If the reload icon
and the Door Lock icon will flash. When the Door Lock Icon disappears, the door can be
opened.
•
If the Door Lock icon
50°C or that it is too late to load more clothing into the machine because the latter will
not get washed.
Program information
1.
The ECO 40-60 program is suitable for washing normally soiled cotton laundry, that is
washable at 40°C or 60°C, in the same cycle. This is the program used to assess compliance
with European eco-design regulations.
2.
Power consumption is 0.49 W in off mode, and 0.49 W in standby mode.
3.
The most energy-efficient programs are usually the ones that work at lower temperatures
for longer periods of time.
4.
Loading the household washing machine in accordance with the maximum capacity
recommended by the manufacturer for the program in question helps to save energy
and water.
5.
Correct use of the washing product, fabric softener and other additives. Do not use an
excessive amount of washing product. This could adversely affect washing performance.
6.
Periodic cleaning (including optimal frequency), procedure and limescale prevention.
7.
The noise level and residual humidity depend on the spin speed: the higher the speed
during the spin phase, the louder the noise level and the lower the residual humidity level.
is lit, the door can be opened during the cycle, and the time remaining
does not flash, it means that the current temperature is above
20
EN
Advertenties
