Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Cleaning and maintenance.
You can ensure that your Clean Air Optima® CA-603 humidifier will provide years of
trouble-free operation by following a few simple maintenance procedures. If your water is hard
and contains high concentrations of calcium and other minerals, over time white dust (lime) will
start to settle on the various surfaces in the room. A white deposit (lime scale) will also form
in the water basin, on the transducer and on the interior of the water tank. Lime deposits will
impair the proper functioning of the transducer and the efficient hygienic humidification of the
unit.
We recommend the following:
1. Clean the transducer and the water basin once a week if you use the appliance daily with
Clean Air Optima® Cleaner & Descaler.
2. As soon as the water tank needs refilling, pour out any remaining water and fill it with
fresh water.
3. Clean the entire device and keep all parts completely dry when the device is not in use.
Cleaning the transducer and water basin
Unplug the device.
During cleaning and descaling, the device must not be used.
Remove any splashes of Clean Air Optima® Cleaner & Descaler from work surfaces or the
outsideof the device with a soft, damp cloth.
1. Pour two capfuls of Clean Air Optima® Cleaner & Descaler into the water basin (one
onto the surface of the transducer and one in the water basin) and leave for between
two and five minutes.
2. Carefully remove the mineral (lime) layer from the surface of the transducer with a small
brush, cotton swab or toothbrush.
Caution: never use sharp or hard objects to clean the transducer.
Specially developed for Clean Air Optima® humidifiers
- Not aggressive
-
Protects plastic and ceramic materials of the humidifier
- Odour neutral
- Cleans & descales quickly and thoroughly
- Biodegradable
You can order the Clean Air Optima® Cleaner &
Descaler from our online shop at
www.cleanairoptima.com.
9
Advertenties
Inhoudsopgave
