Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
How to use
The product has three different heating modes: low (1 flame), medium (2 flames) and high (3
flames), as shown in figure B.
1.
Open the gas valve on the gas cylinder one to
two turns.
2. Push the control knob down, turn to the starting
position and hold the knob down.
3. Press the ignition button repeatedly until the
product ignites.
4. Hold the control knob down for 10-15 seconds until
the product lights.
5. Once the product is lit, press and turn the control
knob to position "low," "medium" or "high" to turn
on more heating power.
6. To turn the product off, press and turn the control
knob to the 'start' position and close the gas valve
on the gas cylinder.
7. The product can only be turned off by completely
shutting off the gas cylinder.
Replacing the gas cylinder
Never change the gas cylinder or regulator while the product is still burning!
Replace the gas cylinder only in a well-ventilated area!
Do not use an open flame, match, cigarette or other flammable materials
while replacing the gas cylinder!
1.
Always make sure that the gas valve of the gas cylinder is completely closed.
2. Always allow the product to cool completely before changing the gas cylinder.
3. Remove the protective cap from the gas cylinder at the back of the product.
4. Close the gas valve on the gas cylinder and/or gas regulator.
5. Remove the gas regulator from the empty gas cylinder.
6. Remove the gas cylinder and replace it with a suitable gas cylinder. Insert the gas cylinder
into the product and make sure that the connection of the gas cylinder valve points
outward.
7. Install the gas pressure regulator on the gas cylinder valve connection. Tighten the
connection nut hand-tight, do not use force as it may deform the sealing rubber resulting
in gas leakage.
High mode
Medium mode
Low mode
Start mode
English
B
23
Advertenties
Inhoudsopgave
Probleemoplossen
