Download Inhoudsopgave Inhoud Print deze pagina

Bestway 58499 Gebruikershandleiding pagina 17

Verberg thumbnails Zie ook voor 58499:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

5. Completely spill the sand out of the tank and dry all
components.
6. Move away sand filter from pool area, store the sand filter
in a dry indoor location out of child's reach.
Problems
- Sand is too small
- Move the control valve from the
Sand is flowing
to the pool
- The level of the sand is too high
- The skimmer is broken
- Stopper plugs were not removed
- Air was not released
- The control valve is set to Closed
No water flow
- The strainer is blocked
- Sand filter broken
- Dirty filter
- Calcified sand bed
Excessive filter
- Insufficient backwashing
pressure
- The pressure gauge is broken
- Control Valve is set between two
Control Valve leaks
from the port D
- The gasket is broken
- Washer of the connectors not in place
Connectors leak
- Washer of the connectors broken
- Loose Hoses
TROUBLESHOOTING
Probable Causes
backwash to the filter function without
stop the sand filter
functions
- Recommend 0.45 mm to 0.85 mm #20
silica sand
- Stop the sand filter every time set the
control valve
- Check if the level of the sand is between
the marked "MAX" and " MIN" on the
collector hub
- Replace the skimmer
- Remove the stopper plugs and insert the
debris screens
- Release the air
- Set to filter function
- Clean the strainer
- Call for service
- Backwash
- Inspect sand and change if necessary
- Backwash until water runs clear
- Replace the pressure gauge
- Set to one function
- Replace the gasket
- Reposition the washer
- Replace the washer
- Tighten them
17
Solutions

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Flowclear 58499

Inhoudsopgave