Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
RCD Test
A. Insert the plug into the
power outlet.
B. Press the "RESET"
button; the indicator light turns red.
NOTE: If the indicator light is not on, the test has failed.
C. Press the "T" button; the indicator light turns off.
NOTE: If the indicator light is not off, the test has failed.
D. Press the "RESET" button, the indicator light turns
red, and the sand filter is ready for use.
WARNING: RISK OF ELECTRIC SHOCK. The
RCD plug must be tested before each use.
WARNING: Do not use the sand filter if this test fails.
Please contact your local Bestway Aftersales Service.
WARNING: Insert the RCD plug into a residual current
device (RCD) having a rated residual operating not
exceeding 30 mA.
WARNING: Before inserting plug into a power outlet,
make sure the current rate of the power outlet is suitable
for the sand filter.
OPERATION
Timer
1. Plug into power source,
adjust power switch to
"ON" (-) position. The
sand filter will begin
working immediately.
2. Adjust power switch to
"OFF" (0) position. The
sand filter will stop working immediately.
3. After turning on, you can adjust work time, rest time
and cycle time by turning the knob to desired position.
See the table below for more details.
A
11
B
C
D
Advertenties
Inhoudsopgave
