Download Inhoudsopgave Inhoud Print deze pagina

Removing The Oven Door - Atag CS4674M Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

CLEANING

Removing the oven door

• Disconnect the appliance from the power supply by removing the
plug from the socket or by switching off the circuit breaker in the
fuse box.
• Please note: the light bulb can be very hot! Use protection to
remove the bulb.
Halogen lamp: G9, 230 V, 25 W
The oven is fitted with a halogen lamp.
This product contains a light source of energy efficiency class (G).
1. Remove the four screws from the cover panel. Remove the cover
panel, the glass and the sealing ring.
2. Remove the faulty halogen lamp and replace it with a new one.
3. Replace the cover panel, the glass and the sealing ring.
Attention: The sealing ring needs to fit perfectly in the oven wall recess.
Keep your fingers away from the hinges of the oven door. The
hinges are spring loaded and can cause injury if they spring back.
Make sure that the hinge latches are applied correctly to lock the
hinges.
Remove the oven door.
1. Open the door to the fully open position.
2. Lift both hinge latches (A) and pull them towards the oven door (B).
The hinges will be locked in the 45° position.
3. Gently close the door until it reaches a 45° angle.
EN 51

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Cs6674mCs4585m1cCs6585m1c

Inhoudsopgave