o Egg whisk
F
o Dust cover
G
ingredients in the bowl and to minimize external dust entering the mixture.
Insert the dough hook / mixing beater / egg whisk directly until it locks into position with a clockwise twist.
•
Pulse function:
The device is equipped with a pulse function. To use the pulse function, turn the speed selector
hold it. The pulse speed corresponds with speed 5 of the speed selector.
NOTE:
Make sure the dough hook, mixing beater or egg whisk is fully inserted into the socket, otherwise your mixing
result may be affected.
Place the bowl splash protector
•
Place the stainless steel bowl
•
clockwise until it locks into the right position (see fig.1). Turn the bowl
To lower the head and place the dough hook
•
bowl
, hold the mixer head with one hand and ease the head downwards and push the tilt button
B
A clicking sound will be heard when the head reaches the correct position.
Make sure the bowl splash protector
•
Once mixing has been completed, turn the speed selector
•
from power socket.
Turn the tilt button counter clockwise to the upwards position
•
lock into the tilt position.
The speed selector
•
socket before pulling out the beater/hook/whisk.
The device has a thermal fuse protection. If the device gets stuck due to a hard mixture or due to obstructions
•
and the device starts to overheat, it will automatically blow the thermal fuse and the device will stop working. To
prevent this from happening, immediately switch OFF the unit by turning the speed selector
position and disconnect the device from the mains power by removing the plug from the power socket.
The device will automatically switch OFF after 10 minutes of non-stop use, this is an automatic safety
•
feature.
Raised mixer head
Using the device for mixing
• Make sure the speed selector
• Once the bowl and mixing accessory have been installed and ingredients have been placed in the bowl, turn the speed
selector
to your desired speed (0 – 1 – 2 – 3 – 4 – 5 - 6).
A2
for beating and frothing egg white, milk, whipping cream, liquid foods, etc.
can be placed on top of the mixing accessories to provide extra protection of the
onto the stainless steel bowl
C
in position. First place the bowl
B
is in place.
C
must be in the "0" (OFF) position and the plug must be unplugged from the power
A2
A1
A2
is in the "0" (OFF) position and insert the power plug in the power socket.
B
B
B
, mixing beater
or egg whisk
D
E
to the "0" (OFF) position and unplug the cord
A2
, the mixer head will automatically lift and
A1
.
on the base, then turn the bowl
counter clockwise to unlock it.
into the stainless steel
F
A2
A1
Lowered mixer head
to "P" and
A2
B
down.
A1
to the "0" (OFF)
EN 05