NI
GB
IE
The bit changeable drum en-
gages audibly.
3. Push the slide of the interchange-
able cordless screwdriver (4) to
the back.
Only grab the side of the
slide of the interchangeable
cordless screwdriver.
Caution, risk of injury caused
by pinching!
The selected bit is automatically fi xed in
the bit holder (
3).
Bit change in the bit
changeable drum
Remove the bit (2) from the bit holder (3).
Insert a suitable 6-point bit in the bit holder
(3). Because of the 6-point bit holder, it may
be that you need to rotate the bit slightly.
Slide the bit right into the bit holder
(3). The bit is held fi rmly by the duct and the
magnetic holder.
Use extension bit holder
Remove the current bit (2) from the bit holder
(3).
Insert the extension bit holder (12) into the
bit holder (3). It may be that you need to
rotate the extension bit holder (12) slightly
because of the 6-point bit holder. Com-
pletely insert the extension bit holder (12)
into the bit holder (3). The extension bit
holder (12) is held fi rmly by the duct and
the magnetic holder.
To remove the extension bit holder (12), sim-
ply remove the extension bit holder from the
bit holder (3).
12
Cleaning and
maintenance
Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
Cleaning
Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
• Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a dry cloth or brush to do this.
Do not use cleaning agents or solvents.
You may otherwise irreparably damage
the appliance.
Maintenance
The appliance is maintenance free.
Storage
• The device may not be stored in a
damp environment or in places with cor-
rosive gases. Store the device in a dry
location outside of the reach of children.
• Keep the surface of the device clean and
only use a dry cloth for cleaning.
• The device must not be dismantled. If the
device is damaged, contact the supplier
or manufacturer.
• Store the battery only in a partially charged
state. The state of charge should be
40 – 60 % over a longer storage period.