Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
lead-free solder .
Heating-up time: approx . 3 minute and 00 seconds
• Level 4 =
Approx . 400°C – High soldering temperature, e .g . for
removing solder from small soldered joints .
• Level 5 =
Approx . 500°C – Maximum soldering temperature, e .g . for
desoldering large solder joints .
Heating-up time: approx . 6 minutes and 30 seconds
Switching off
Always replace the soldering iron ❶ in the
NOTE
spiral spring ❽ after use .
• Put the ON/OFF switch ❺ into the "0" position . When not in use, unplug
the power cord from the power outlet .
Solder sponge
• The hot soldering tip ❼ must never come into contact with a dry solder
ATTENTION
sponge ❻ . Otherwise, the solder sponge might sustain damage .
NOTE
• The solder sponge is used to clean the soldering tip .
• Moisten the soldering sponge slightly before you use it . Any excess liquid
must be removed from the vicinity of the device before it is used .
Soldering
When inhaled, vapours can cause headaches and fatigue, among
other things .
• The soldering iron's rated power is 48 watts which makes it ideal for
electronic soldering .
• Its design makes it especially suitable for difficult-to-access and fine
soldering work .
PLS 48 D2
Heating-up time: approx . 4 minutes and 30 seconds
27
GB
|
Advertenties
Hoofdstukken
Inhoudsopgave
