Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Cautions
1. The induction hot must be installed by qualified personnel or technicians.
2. The hob must not be installed directly above a dishwasher, fridge, freezer, washing machine or a dryer as the humidity may
damage the hob electronics.
3. The induction hot must be installed in a way that better heat radiation can be ensured to enhance its reliability.
4. The wall and induced heating zone above the worksurface must withstand heat generated by the hob.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
Connecting the hob to the mains power supply
!
This hob must be connected to the mains power supply only by a suitably qualified person.
Before connecting the hob to the mains power supply, check that:
1. the domestic wiring system is suitable for the power drawn by the hob.
2. the voltage corresponds to the value given in the rating plate
3. the power supply cable sections can withstand the load specified on the rating plate.
To connect the hob to the mains power supply, do not use adapters, reducers, or branching devices, as they can cause
overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that itstemperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is suitable without alterations. Any alterations must only be made
by a qualified electrician.
The power supply should be connected in compliance with the relevant standard,or a single-pole circuit breaker.the method of
connection is shown below.
CONNECTION DIAGRAM
Caution! Voltage of heating
elements 220-240V Caution! In the event
of any connection the safety Wire
must be connected to the
• If the cable is damaged or to be replaced, the operation must be carried out the by a service agent or a suitably qualified
professional.
• If the appliance is being connected directly to the mains, an omnipolar circuit breaker must be installed with a minimum
opening of 3mm between contacts.
• The installer must ensure that the correct electrical connection has been made and that it is compliant with all applicable
standards and safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorised technicians only.
Model identification
Type of hob
Number of electric cooking zones and/or areas
Heating technology (induction cooking zones
and cooking areas, radiant cooking zones,
solid plates)
For circular cooking zones or area: diameter
of useful surface area per electric heated
cooking zone, rounded to the nearest 5 mm
For non-circular cooking zones or areas:
length and width of useful surface area per
electric heated cooking zone or area, rounded
to the nearest 5 mm
Energy consumption per cooking zone or area
calculated per kg
Energy consumption for the hob calculated
per kg
E terminal.
This appliance is labelled in compliance with European directive 2012/19/EC for Waste Electrical and Electronic
Equipment (WEEE). By ensuring that this appliance is disposed of correctly, you will help prevent any possible harm
to the environment and to human health which might otherwise be caused if disposed of in the wrong way.
The symbol on the product indicates that it may not be treated as normal household waste.
It should be taken to a collection point for the recycling of electrical and electronic goods.
This appliance requires specialist waste disposal. For further information regarding the treatment, recovery and
recycling of this product, please contact your local council, household waste disposal service or the shop where you
For more detailed information about treatment, recovery and recycling of this product, please contact your local local
council, household waste disposal service or the shop where you purchased the product.
L1
L2
N1 N2
L1
L2
N1 N2
E
L
L
N
N
purchased the product.
Symbol
--
--
--
--
Ø
L, W
EC
electric cooking
EC
electric hob
8
Recommended
type of
connection lead
Value
EKI901-2.1
Built-in hob
5
Induction zones
210 mm
180 mm
140 mm
N/A
Φ210 zone: 202
Φ180 zone: 187
Φ140 zone: 189
191
Unit
mm
mm
Wh/kg
Wh/kg
Advertenties
Inhoudsopgave
