Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
f) Measurement unit change
The laser measuring device LDM-100H can measure and
save measured values in different units. To change the unit,
push and hold the
until the desired unit is shown. You can switch between the
units metre (m), inch (in) and feet (ft) - in this order. New
measured values are measured and displayed in the unit
that has been set before. While measured values are dis-
played in the measuring mode, you can switch between the
units for all displayed values.
Distance
1
0.000 m
2
0.0 in
3
01/16 in
4
0.000 ft
5
0'00'' 1/16
The values are saved in the memory with the unit chosen at
the time of the measurement.
g) Display illumination
The
(9) - screen brightness button switches the display
backlighting on and off. The display brightness is reduced
automatically at extended inactivity. Pushing a button (other
than the brightness button) switches on the display back-
lighting again.
58
UNIT(9) button. Push and hold it again
Area
0.000 m2
0.000 ft2
0.000 ft2
0.000 ft2
0.000 ft2
Volume
0.000 m3
0.000 ft3
0.000 ft3
0.000 ft3
0.000 ft3
Advertenties
Hoofdstukken
Inhoudsopgave
