MAIN TECHNICAL DATA
Model
Power
1.5HP
Volt.
230~240
Freq.
50Hz
Speed
2850r/min
Displace.
190L/min
Pressure
0.8Mpa
Noise
85dBa
▲
NW
22kg
INSTALLATION
It is extremely important to install the compressor in a clean, well ventilated area where the
▲
surrounding air temperature will not be high than 40°C.
A minimum distance of 1m between the compressor and objects is required because objects
could obstruct airflow.
▲ CAUTION! Do not locate the air inlet of compressor near steam, paint spray, sandblast areas
or any other source of contamination. This debris will damage the motor.
ELECTRICAL INSTALLATION
▲ WARNING! All wiring and electrical connections should be performed by a qualified electrician.
Installation must be in accordance with local codes and national electrical codes.
▲ CAUTION! Never use an extension power cord with this product. Use additional
air hose instead of an extension power cord to avoid power loss and permanent
motor damage; Use of an extension power cord voids the warranty.
GROUNDING INSTRUCTIONS
1. This product is for use on a nominal 230 volt circuit and has a grounding plug that looks like
the plug illustrated in Fig.3. Make sure the product is connected to an outlet having the same
configuration as the plug. This product must be grounded. In the event of an electrical short
circuit, grounding reduces risk of electrical shock by providing an escape wire for electric
current. This product is equipped with a cord having a grounding wire with an appropriate
grounding wire with an appropriate grounding plug. Plug must be plugged into an outlet that
is properly installed and grounded in accordance with all local codes and ordinances.
Figure 3:
▲ DANGER! Improper use of grounding plug can result in a possible
risk of electrical shock!
▲ DANGER! Do not use a grounding adapter with this product!
21058
21059
2.0HP
3.5HP
230~240
230~240
50Hz
50Hz
2850r/min
2850r/min
240L/min
480L/min
0.8Mpa
0.8Mpa
85dBa
86dBa
24 kg
45 kg