Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
44
www.aeg.com
Problem
There are stains and dry water
drops on glasses and dishes.
The dishes are wet.
The interior of the appliance is
wet.
Unusual foam during washing. • Use the detergent for dishwashers only.
Traces of rust on cutlery.
There are residues of deter-
gent in the dispenser at the
end of the programme.
Odours inside the appliance.
Limescale deposits on the ta-
bleware, on the tub and on
the inside of the door.
Dull, discoloured or chipped
tableware.
Refer to "Before first use",
"Daily use" or "Hints and
tips" for other possible
causes.
All manuals and user guides at all-guides.com
Possible cause and solution
• The released quantity of rinse aid is not sufficient. Ad-
• The quality of the rinse aid can be the cause.
• For the best drying performance activate the option
• The programme does not have a drying phase or has
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• The quality of the multi-tablets can be the cause. Try a
• This is not a defect of the appliance. it is caused by
• There is a leak in the rinse aid dispenser. Contact an
• There is too much salt in the water used for washing.
• Silver and stainless steel cutlery were placed together.
• The detergent tablet got stuck in the dispenser and
• Water cannot wash away the detergent from the dis-
• Make sure that items in the baskets do not impede the
• Refer to "Internal cleaning".
• Refer to "The water softener".
• Make sure that only dishwasher-safe items are washed
• Load and unload the basket carefully. Refer to basket
• Place delicate items in the upper basket.
just the rinse aid level to a higher level.
XtraDry.
a drying phase with low temperature.
different brand or activate the rinse aid dispenser and
use rinse aid and multi-tablets together.
the humidity in the air that condenses on the walls.
Authorised Service Centre.
Refer to "The water softener".
Avoid to put silver and stainless steel items close to-
gether.
therefore was not completely washed away by water.
penser. Make sure that the spray arm is not blocked or
clogged.
lid of the detergent dispenser from opening.
in the appliance.
loading leaflet.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
