Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
the lid (2). Otherwise boiling water could spill. The indicator
light (7) switches off as well.
6. Lift the kettle (6) off the base (8). The water is now ready
for use.
You can stop the boiling process any time by pushing the
On/Off switch (7) upwards. or by simply removing the kettle
(6) from the base (8).
Water left over from a previous boiling cycle can be re-used
in the next boiling cycle. However, always make sure that the
water level is not too low.
Always unplug the appliance after use.
Dry-boil cut-out
Your kettle is equipped with a boil-dry cut-out, which will
switch off the kettle automatically, should it accidentally be
operated without water or by not observing the minimum
water level. In the event of such a safety cut-out unplug the
appliance immediately and let it cool down for approx. 10
minutes. Afterwards, your kettle is ready for use again.
Cleaning and Care
and disconnect it from the mains and let it completely cool
down.
Never immerse the appliance in water. Danger! Electric
Shock!
Clean the body of the appliance with a moistened soft cloth.
Do not use any aggressive cleaning agents and/or other
hard objects to clean the appliance.
Open the lid (2) and remove the ilter (3). Clean it under
running tap water, if necessary, with a soft nylon brush. Dry it
afterwards and reinsert the ilter into the spout.
18
Before cleaning, always switch off the appliance
Advertenties
Inhoudsopgave
