Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
18
the compartment
Temperature inside is
too warm
Temperature inside is
too cold
Doors can't be closed
easily
Reversing the door
The side in which the door opens can be
changed from the right side (as supplied)
to the left side, if the installation site
allows for it. Tools you will need:
Before you start lay the refrigerator
Note:
on it's back in order to gain access to the
base, you should rest it on soft foam
packaging or similar material to avoid
food is placed within the appliance to allow sufficient
ventilation. Ensure that door is fully closed. To remove the
frost, please refer to the "Cleaning and care" chapter.
You may have left the doors open too long or too frequently;
or the doors are kept open by some obstacle; or the
appliance is located with insufficient clearance at the sides,
back and top.
Increase the temperature by following the "controls panel"
chapter.
Check whether the top of the refrigerator is tilted back by 10-
15mm to allow the doors to self close, or if something inside is
preventing the doors from closing.
damaging the backboard of the
refrigerator. To reverse the door. The
following steps are generally
recommended.
1．Stand the refrigerator upright. Open
the door to take out all door racks（to
avoid racks damaged）.
2. Remove the screw hole cover and
upper hinge cover（right）as follow
diagram.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
