Direct Monitoring Blend; Advanced Mic Settings; Limiter; Compressor - Shure MV88plus Video Handleiding

Verberg thumbnails Zie ook voor MV88plus Video:

Inhoudsopgave

Advertenties

Beschikbare talen

Direct Monitoring Blend

There are two ways to access the Direct Monitoring slider when you want to adjust your monitor source. Tap the input meter to

view the mic gain and monitoring blend sliders. Or you can view the slider by tapping the headphone icon in the device settings

tab.

Use the direct monitoring slider to determine how much of each input you hear. For best results, start monitoring at the mid-

point and adjust.

•

Move the slider towards Mic to hear more of the audio that is being currently recorded by the microphone.

•

Move the slider towards Playback when you want to listen to the previously recorded audio and less of the audio coming

in to the microphone. This is useful for when you want to review your recording.

After you have selected the preset mode for your application, fine tune the sound of your recording with limiter, compressor,

and equalizer controls. Your settings will be retained in the microphone when using other audio and video recording applicati-

ons.

Toggle the limiter on to set an input threshold and prevent distortion from volume peaks in your recordings.

Choose no compression, or select light or heavy compression to control volume when your sound source is dynamic. The com-

pressor will narrow the dynamic range, which means that quiet signals are boosted and loud signals are lowered.

As one source increases, the other source decreases.

Shure Incorporated

11/18

Inhoudsopgave

Advertenties

Inhoudsopgave