Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
e) Power tool use and care
• Do not force the power tool. Use the correct power tool for your application. The correct power tool will
do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before making
any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained
users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool's operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
f) Service
• Have your power tool serviced by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
g) Safety warning for jig saw
• Keep electric tools away from children.
• Store electric tools in the original box in a safe place and out of the reach of children
• When not in use, during breaks, when do adjustment works, changing accessories or during repair,
always unplug the cable.
• Never carry the tool by the cable. Never unplug the tool by pulling on the cable.
• When working: Do not allow the motor to stall under load.
• Keep your workplace tidy: untidiness can cause accidents!
• Avoid abnormal body postures while working.
• Avoid switching on or starting up the machine unintentionally.
• Do not leave keys, spanners and adjusting tools inserted in the machine.
• After switching off, do not stop the saw blade to a stop by applying side pressure.
• Use only sharp, flawless saw blades. Replace immediately cracked, bent or dull saw blades.
• Always pull out the mains plug before changing the saw blade and/or adjusting the saw base.
23
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
