Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
or energising power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power
tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can reduce dust related hazards.
d) Laser safety
• When operating the laser equipment, always make sure that the laser beam is directed so that no one
is in the projection area and that unintentionally reflected beams (e.g. from reflective objects) cannot be
directed into areas where people are present.
• Laser radiation can be dangerous, if the laser beam or its reflection enters unprotected eyes. Therefore,
before using the laser equipment, familiarise yourself with the statutory regulations and instructions for
operating such a laser device.
• Never look into the laser beam and never point it at people or animals. Laser radiation can seriously
damage your eyes.
• If laser radiation enters your eyes, close your eyes immediately and move your head away from the
beam.
• If your eyes have been irritated by laser radiation, do not continue to carry out tasks with safety
implications, such as working with machines, working from great heights or close to high voltage. Also,
do not operate any vehicles until the irritation has completely subsided.
• Do not point the laser beam at mirrors or other reflective surfaces. The uncontrolled, reflected beam may
strike people or animals.
• Never open the device. Setting or maintenance tasks must only be executed by a trained specialist
familiar with potential hazards. Improperly executed adjustments might result in dangerous laser
radiation.
• The product is equipped with a class 2 laser. Laser signs in different languages are included in the
package. If the sign on the laser is not written in the language of your country, please affix the appropriate
sign onto the laser.
• Caution: if operation settings or procedures other than those described in these instructions are used, it
could lead to exposure to dangerous radiation.
22
All manuals and user guides at all-guides.com
LASER RADIATION
DO NOT STARE INTO THE BEAM
CLASS 2 LASER PRODUCT
Max Output: < 1.0 mW
Wavelength: 650 nm
EN60825-1: 2014
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
