Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6.
Remove using a tool the cover (b1). Un-
screw the lower hinge pivot (b2) and the
spacer (b3) and place them on the op-
posite side.
7.
Re-insert the cover (b1) on the opposite
side.
8.
Remove the plugs (t1) on the upper side
of both doors and move them to the
other side.
9.
Re-insert the lower door on the lower
hinge pivot (b2).
10. Insert the middle hinge (m2) into the left
drill of the lower door.
11. Unscrew the upper hinge pivot (t1) and
place it on the opposite side.
12. Fit the upper door on the upper door
pivot.
13. Re-insert the upper door on the middle
hinge pivot (m5) slightly tilting both
doors.
14. Re-screw the middle hinge (m2). Do not
forget the plastic spacer (m1).
15. Remove the covers (h1). Remove the
cover pins (h2).
16. Unscrew the handles (h3) and fix them
on the opposite side.
17. Re-insert the cover pins (h2) on the op-
posite side.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
Installation
b3
1
h2
h3
35
b1
b2
t1
h1
Advertenties
Hoofdstukken
Inhoudsopgave
