2
appliance description
1.
Lid with cap
2.
Jug with knives (max. capacity 400 ml)
3.
Pulse button
4.
Base
3
before first use
Before you use the appliance for the first time, please do
as follows: Carefully unpack the appliance and remove all
the packaging material. Keep the material (plastic bags and
cardboard) out of reach of children. Check the appliance after
unpacking for any damage, possible from transportation. Place
the mixer on a flat and stable surface. Rinse all the accessories
- jug, lid and cap - with warm soapy water and dry them
thoroughly. Wipe the base with a damp cloth. Always roll out the
cord completely.
When the mixer is in use, the ingredients will be transported
along the sides of the jug to the top and will come down through
the middle. This system guarantees that even ice cubes will be
completely crushed.
Make sure that all the parts are dry before you use the appliance.
• Place the mixer on a flat and stable surface as soon as you
have rolled out the cord. Attach and turn the jug counter
clockwise on to the base. If the jug is not placed correctly the
mixer will not function. Practice a few times to disassemble
and assemble the mixer without any ingredients.
• The middle of the lid has a cap which can be used as a
measuringcup and for adding ingredients. Through the
opening in the lid you can gradually add ingredients.
• The base contains the motor.
• The pulse button regulates the speed of the mixer, on or off.
4
using the mixer
Before plugging into a socket, check that the voltage in your
home corresponds with the voltage printed on the bottom of
the appliance.
1. Place the mixer on a flat, clean and dry surface.
2. Place the ingredients in the jug and lock it with the lid.
3. Activate the mixer by pressing the pulse button.
Attention: Do not activate the mixer constantly, this can
cause engine problems. Do not use the mixer for more then
1 minute continuously, wait 1 minute before you operate it
again.
5. When the mixer has finished mixing, blending or crushing
release the speed button and wait until the knives have
stopped turning, before you remove the jug.
5
tips
• When the jug is cracked, do not use the mixer anymore.
This could lead to damage while using the mixer.
• To avoid splashes always place the lid on the jug.
• Always add liquid ingredients before adding solid ingredients
in the mixer.
• The mixer mixes best when you do not add pieces which are
too large.
• Always add half a cup of liquids when you crush ice cubes.
• To add ingredients while the mixer is activated, take the cap
out of the lid and add the ingredients through the opening.
• When the ingredients stick to the sides of the jug or are not
mixed properly, shut off the engine: wait until the knives have
stopped turning and push the ingredients with a spatula
towards the knives.
• To prevent the ingredients from being blend to small, take
into account that the mixer mixes in seconds, not minutes!
1
2
3
4
11
English
•