Download Inhoudsopgave Inhoud Print deze pagina

Troubleshooter's Checklist; Warranty; Conditions And Specifications - pewag VNMW Gebruikershandleiding

Veiligheids-hijsklem
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

10. Troubleshooter's Checklist

Fault
Load slipping
Body bent
Lifting eye oval shape
Spring defective
Spindles bent or worn
Retaining pins missing
Clamp difficult to open/close

11. Warranty

pewag austria GmbH provides end users with a 5 year warranty on its lifting clamps. This warranty is applicable to
the original end user of the lifting clamps. This warranty applies only if the clamp has been inspected, checked and
maintained in line with the manufacturer's and distributor's instructions during the entire warranty period.
This warranty period of 5 years is valid from the day of purchase, and is subject to all conditions and specifications
stated in this document.

12. Conditions and Specifications

This warranty only covers faults which are due to production errors and occur during normal use. The warranty
covers no wear to components such as pivots, cam assemblies, lock springs etc. Should there be any kind of failure
within this warranty period, the lifting clamp will be replaced or repaired following assessment by the producer.
No warranty is given to clamps with faults due to the following:
• Normal wear
• Overload
• Wrong and/or careless use
• Damages
• Not following procedures and measures
• Hoisting differing material than indicated on clamp or stated in the user's manual
• Adapting and/or modifying of the pewag clamp
• The incompetent use of the clamp, and not following all indications which are stated in the user's manual
• When maintenance and/or revision has not been carried out by an authorised pewag distributor
The producer is not responsible for incidental damage or damage due to incorrect use of the clamps as well as from
violation of this manual.
Possible Cause
Load dirty
Lifting eye and chain deformed
Jaw is open and bent
Clamp overloaded
Clamp overloaded
Spring worn out
Clamp overloaded
Incorrectly assembled
Clamp worn out
Clamp contaminated
Action
Clean load
Replace
Replace
Reject clamp
Reject clamp
Overhaul clamp
Reject clamp
Fit new retaining pins
Reject clamp
Clean
E
11

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Vnmaw

Inhoudsopgave