Advertenties
Beschikbare talen
Beschikbare talen
the electronic switch when you want to start the machine slowly for a
optimal surface.
Permanent use with reduced speed can cause an overload because
the motor then gets less cooling air and therefore the machine will be
overheated much faster.
Tool Change
Attention!
Before the beginning of all works disconnect the plug
from the mains!
Mounting the base plate:
Place the base plate onto the head spindle and secure it with the help of
the provided screw.
Mounting the work disk:
Place the work disc centrally onto the Velcro plate.
The entire disk must cling to the Velcro plate to ensure that the disk is
attached securely.
Attention!
Before you start working, check whether the accessory has the exact
position. Let the machine start running in a safe position for a short
time.
In case the machine does not run easily, immediately stop
working.
Water Supply
Connect the tool to the water supply system or a
water tank using the GARDENA connector.
Please use a GARDENA hose coupling as
connecting piece to the machine.
coupling is available on the market.
Only use clear tap water.
The hose
17
Advertenties
