Download Inhoudsopgave Inhoud Print deze pagina

Adjustments; Adjustment Of Inside Height / Griping Range - probst RGV-9/9 Bedrijfshandleiding

Verberg thumbnails Zie ook voor RGV-9/9:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Adjustments

5
Adjustments
1.1

Adjustment of inside height / griping range

The illustraded griping good (Turf Stone) can be gripped in only two adjusting holes (4th hole each from
the inside) for a gripping range/gripping width (GW) of approx. 300 mm and adjusting holes (7th hole
each from the inside) for a gripping range/gripping width (GW) of approx. 500 mm (Fig. 1).
In addition, the "inside height E (Et)" of the grippers on the adapter (4) can be changed, which must be
adjusted depending on the gripping goods to be picked up (Turf Stones) ( Fig. 3).
GW = gripping range/gripping width
Et = inside height E
By adapting the adapters with grippers (4), the device can be used for lifting different sizes of
gripping goods.
The gripping range/gripping width (GW) is adjusted as follows:
Place the device on the ground, loosen the wing nuts (7) and then remove the wing screws (8).
Displace the adapter with grippers (4) until the gripping range/gripping width (GW) is adjusted to
the gripping good, making sure that both adapters with grippers (4) are positioned
symmetrically (to the central axis of the device).
Insert the wing screws (8) into the corresponding adjusting holes and then secure again with
wing nuts (7).
53100436
Fig. 1
Fig. 2
13 / 20
GB

Advertenties

Inhoudsopgave
loading

Inhoudsopgave