Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2. Set the steam control
steam) position. Set down the product with
the base
on an even, stable surface.
[
8 ]
3. Disconnect the mains plug
socket-outlet.
4. Let the product cool (this takes approximately
15 minutes). Do not leave the product
unattended while it is still hot.
5. To prevent limescale build-up, empty the
water tank after each use. To do so, open
the lid of the fill opening
water tank via the fill opening
the iron upside down over a sink.
˜ Additional product features
Anti-drip system
The product features an anti-drip system.
o
This prevents water from exiting from the
soleplate
as long as the temperature
[
1 ]
is too low to produce steam. This feature
prevents water stains on your clothing.
Anti-lime filter
Do not use any additives. Additives may
damage the water filter.
The product features an anti-lime filter. This is
o
a permanent water filter. It is not in need of
replacement or maintenance.
˜ Cleaning and care
DANGER! Risk of electric shock!
Always disconnect the mains plug
the socket-outlet before cleaning the product.
m
WARNING! Do not immerse the product's
electrical components in water or other
liquids. Never hold the product under
running water.
Do not let any water or other liquids enter
the product interior.
Do not use any abrasive, aggressive cleaners
or hard brushes to clean the product.
1. Wipe down the product with a slightly damp
cloth.
2. Clean the soleplate
and a mild, non-scouring detergent.
3. Let all parts dry completely after cleaning.
12 GB/IE/NI
to the
(no
4 ]
[
from the
7 ]
[
. Empty the
3 ]
[
by holding
from
[
7 ]
using a damp cloth
[
1 ]
˜ Self-cleaning function
DANGER! Risk of electric shock!
Always disconnect the mains plug
the socket-outlet before filling the water tank.
The product features a self-cleaning function
o
to remove filth and limescale build-up in the
steam channels.
Use the self-cleaning function at least twice
o
per month.
If you use tap water: Use the self-cleaning
o
function after every use.
1. Before filling water into the water tank: Set
the steam control
[
4 ]
position.
2. Open the lid of the fill opening
Never fill the water tank past the max
mark
.
[
12 ]
3. Turn the temperature control
clockwise all the way to MIN.
4. Plug the mains plug into an appropriate
socket-outlet.
5. Set the temperature control to the highest
temperature (turn clockwise all the way).
6. Set the steam control to maximum steam
power.
7. Wait for the product to heat up and the
control light
to go off.
9 ]
[
8. Hold the product horizontally over a sink.
9. Press and hold the self-cleaning button
until no more steam or boiling, soiled water
exits the product.
10. Empty the water tank of any residual water
via the fill opening
˜ Storage
Store the product in the original packaging
when it is not in use.
Store the product at a dry location out of the
reach of children.
Store the product with the water tank empty
only.
from
7 ]
[
to the
(no steam)
.
3 ]
[
counter-
10 ]
[
11 ]
[
.
Advertenties
Hoofdstukken
Inhoudsopgave
