Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Usage
Press the timer button to set the working time. Every push increases the working time by
60 minutes. You can set between 1 - 12 hours and the device is turned off when the timer
expires.
TIMER
To exit this mode, press the button until you reach 12 hours and then press once more.
Press the speed button to switch to the next speed level. The speed control can be set to
3 different speed levels. When pressing the button while the highest level is active, the
speed will switch to lowest level again.
SPEED
Note: If you use the speed button, auto mode will be disabled.
While the device is switched on, press the filter button in order to see the accumulated
working time on the display. Since the screen can only display three digits, the thousands
digit will be displayed first, then hundreds, tens and single. Please read them together.
FILTER
If a filter replacement is necessary, this icon will light up. For more information, see
chapter Maintenance.
To connect the device to your app, see chapter Operation via app.
WiFi
Display function description
When the power is turned on, the PM2.5 particle sensor needs to be warmed up for 1
minute to display data. The display data range is 1-500 µm/m³.
When the current display shows PM2.5 data, the PM2.5 and µm/m³ icons next to the
numbers light up. When the current display shows data, which is not PM2.5 data, the
PM2.5 and µm/m³ icons are not lit.
Operation via app
9
Scan the QR-Code and download the "Smart Life" app (suitable for iOS- and
Android).
1
Either log in to your
existing account or sign
up for a new one.
Manual CAS 800
2
Now choose „Add
Device".
EN
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
