Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2. Cut the PVC Crystal tube and insert the tube fixing nut onto the tube.
3. Mount the tube on the conic hose of the suction fitting, pushing it to reach the
stop collar.
4. Secure the tube by screwing the tube fixing nut on the suction fitting of the
pump body.
5. Place the tube inside the tank and/or the suction lance.
6. Unscrew the tube fixing nut of the foot filter fitting.
7. Cut the PVC Crystal tube and insert the tube fixing nut onto the tube.
8. Mount the tube on the conic hose of the foot filter, pushing it to reach the stop
collar.
9. Secure the tube by screwing the tube fixing nut on the foot filter fitting.
10.Screw the foot filter on the suction lance and/or place it in its working site.
Note: Place the foot filter at a minimum distance of 5 cm from the tank bottom. If a
dense product is dosed, it is advisable to remove the internal filter to facilitate
aspiration.
Injection Line
1. Unscrew the fixing nut of the injection fitting located at the bottom left of the
pump body marked with the exiting arrow.
2. Cut the PVC Crystal tube and insert the tube fixing nut onto the tube.
3. Mount the tube on the conic hose of the injection fitting, pushing it to reach
the stop collar.
4. Secure the tube by screwing the tube fixing nut on the injection fitting of the
pump body.
5. Apply a 1/2" GAS fitting internally threaded (not supplied) at the injection point
of the pipeline.
6. Garnish the thread with PTFE tape and screw the injection valve on the fitting.
7. Unscrew the tube fixing nut of the injection valve fitting.
8. Cut the PVC Crystal tube and insert the tube fixing nut onto the tube.
9. Mount the tube on the conic hose of the injection valve, pushing it to reach the
stop collar.
10.Secure the tube by screwing the tube fixing nut on the valve fitting.
Note: The injection valve also works as a non-return valve. Never disassemble it
internally.
Advertenties
Inhoudsopgave
