Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
˜ Charging the battery
B
[
8 ]
1. Connect the USB Type A plug
USB port on your computer or to a USB power
adaptor (not included).
2. Connect the charging adaptor
5 ]
[
charging contacts
product. The charging adaptor is held in place
magnetically.
3. The start of the charging process is shown on
2 ]
[
the display
.
4. When the battery is fully charged: Disconnect
the charging adaptor
the USB Type A plug
NOTES:
The charging adaptor
the position shown in figure B.
Make sure that the charging pins
engage with the charging contacts
The product turns on automatically as soon as
it is connected with the USB port.
The product cannot be operated during
charging.
The charging status is shown on the
2 ]
[
display
.
A charging cycle (charging current: approx.
160 mA) takes approx. 1.5 hours.
[
]
5 ]
[
[
8 ]
to a free
[
]
to the
on the back of the
[
]
from the product and
8 ]
[
from the USB port.
[
]
can only be used in
9 ]
[
correctly
5 ]
[
.
˜ Changing the wristband
1. Push the spring pin
inwards.
2. Remove the wristbands and store them safely.
3. Insert a compatible new wristband and fix both
spring pins until they lock securely.
NOTES:
Compatible wristbands may contain different
spring pin variants.
Read the instruction manual of your optionally
available wristband carefully to ensure a tight
and secure fit. Otherwise, the wristband could
come loose and damage the smartwatch.
Also note that the width of the wristband
is compatible with the smartwatch. The
recommended width is 20 mm.
˜ Initial app setup
NOTES:
Screenshots are from Android 10 version or
from iOS 13.3 version.
Older versions may have functional limitations.
Updating the firmware might result in changes
to the app's functionality.
Screenshots are for reference only. There may
be slight deviations between iOS and Android
versions.
Preparation
Download the SilverCrest Watch app by
using the QR code on the packaging.
The QR code is also on the sticker on the
display of the smartwatch.
Install SilverCrest Watch app.
Switch on Bluetooth function on the mobile
device.
[
]
of each wristband
GB/IE/NI
11
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
