Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
A device must be provided in the electrical installation which allows the ap-
pliance to be disconnected from the mains at all poles with a contact open-
ing width of at least 3 mm.
Suitable isolation devices include line protecting cut-outs, fuses (screw type
fuses are to be removed from the holder), earth leakage trips and contac-
tors.
Sticking the seal in the rabbet
• Clean the rabbet in the work surface.
• Stick the one-sided self-adhesive sealing tape supplied onto the upper
surface of the rabbet along the edges of the cut-out section.
– Cut the sealing tape into four pieces relating to the length of the edges
of the rabbet.
– For the four corners of the rabbet the ends of the sealing tapes must be
cut into mitres. Do not stick the ends over one another.
– Stick the sealing tape flush into the corner of the rabbet, so that no sili-
con compound can get under the glass ceramic when grouting.
– Don't stretch the tapes when sticking them on.
25
Advertenties
Hoofdstukken
Inhoudsopgave
