Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
B
B
Reversed door
Tools needed: Phillips screwdriver, flat blade screwdriver, hex key.
• Ensure the appliance is unplugged and empty.
• To remove the door, tilt the appliance backwards. You need to the rest the appliance on a
solid object so that it does not slip during the door opening reversing process.
• All parts removed should be kept with care when reinstalling the door.
• Do not lay the appliance flat, as this may damage the refrigeration system.
• We recommend that the appliance is handled by 2 people during assembly.
1
Unscrew the top hinge. Lift the door, then place it on a padded surface to prevent scratches.
Unscrew the middle hinge, then lift the door and lay it on a padded surface to prevent
scratches.
Remove the pin from the lower hinge from right to left.
Move the middle hinge from left to right. Then replace the door.
Reassemble the middle hinge on the left Make sure that the door is aligned horizontally
and vertically and that the seals are closed on all sides before tightening the middle hinge.
Unscrew the top hinge pin from the hinge. Then reverse the hinge and screw in the hinge pin.
Reassemble the door, then the upper hinge on the left. Make sure that the door is aligned
horizontally and vertically and that the seals are closed on all sides before tightening the
lower hinge. If necessary, tighten the hinge with a wrench.
When using the appliance
Utilisation de l'appareil
6
6
EN
FR
Advertenties
Hoofdstukken
Inhoudsopgave
