Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Instructions
Read QR code setting from phone album
Click on QR
Click on the photo button
to go to the album on
your smartphone
Restore to default settings
Click on Menu and
Select "Reset" to
select Reset.
restore to default
settings. Click "OK" if
you want to return to
default settings.
will have to connect in
AP Mode again!
Trouble shooting
Problem
Possible cause
Light does not
Check if the light is connected to power supply
work
Check if the brightness level is set at 0%
Check if the light is swiched off or if the light has been set
to a time setting
The light stays
Check if the total time period is over 24 hours
on without a
Check if the current time is not set accoding to your local
light off time
current time
Select the QR code
Reset the ProLED
1. Switch the Proled "off" and "on"
You
2. Press and hold the reset
bue light for 10 sec.
Select "Choose"
3. The blue light will flash several times,
reset is done.
Solution
Connect to power supply
Adjust the brighness level on your mobile devise
Turn it on or adjust the time setting
Adjust the time accordingly, or reset to factory settings
9
GB
QR code light setting
preview interface. slide
left or right to check
light effcts for
different time periods.
Advertenties
Inhoudsopgave
