Jung FMSTD8UP Bedieningshandleiding pagina 10
Verberg thumbnails
Zie ook voor FMSTD8UP:
- Bedieningsvoorschrift (15 pagina's) ,
- Bedieningshandleiding (13 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
eNet
eNet radiografische stuureenheid DALI 1-voudig mini
Priority, sun protection
Priority, twilight
Switch off brightness overs-
hoot
Switch on brightness unders-
hoot
Minimum brightness
Maximum brightness
Hotel function
82580923
J0082580923
0...4
Basic setting: 0
0...4
Basic setting: 0
On, Off
Basic setting: On
On, Off
Basic setting: Off
1...67 %
Basic setting: 5 %
75...100 %
Basic setting: 100 %
On, Off
Basic setting: Off
10/12
Specifies the priority for
recalling and removing a sce-
ne of type Sun protection for
the channel.
Specifies the priority for
recalling and removing a sce-
ne of type Twilight for the
channel.
Allows automatic switch-off
according to the brightness. If
the parameter is On, then the
light controller switches off
automatically when the
brightness setpoint is greatly
exceeded.
Note: This parameter is not
yet active, as a light controller
has not yet been implemen-
ted.
Allows automatic switch-on
according to the brightness. If
the parameter is On, then the
light controller switches on
automatically when the
brightness setpoint is greatly
undershot. We recommend
only using the parameter in
connection with the parameter
"Switch-off on brightness
overshoot".
Note: This parameter is not
yet active, as a light controller
has not yet been implemen-
ted.
Specifies the minimum setta-
ble brightness.
Note: If parameters or scene
values are set to a level lower
than the minimum brightness,
then the system will dim to
minimum brightness.
Specifies the maximum setta-
ble brightness.
Note: If parameters or scene
values are set to a level higher
than the maximum brightness,
then the system will dim to
maximum brightness.
If the hotel function is activa-
ted, the system will dim to 20
% brightness when a switch-
off command is made. Switch-
off is only possible with a for-
ced position command.
Note: If the minimum
brightness is set to greater
than 20 %, then the system
dims to the set minimum
brightness when the hotel
function is activated.
28.06.2016
Advertenties
Inhoudsopgave
