Installation
Move your cabinet to its desired location.
It must:
•
be open to the outside to allow air circulation
(not placed inside a cupboard...),
•
not be too damp. Max 85% ambient humidity (linen cupboard, laundry
room, bathroom...). ,
•
have a flat, stable floor which can withstand 450 kg,
•
have a power supply (standard outlet, 16 A, earthed with circuit breaker,
30 mA* (* not applicable to some countries).
•
Move your cabinet to its intended location.
•
Wait 48hrs before plugging it in.
I. Installing the charcoal filter
Install the charcoal filter (located in the "accessories" box) via the inside of the cabinet, placing it in the hatch located under the control panel.
1
Unscrew the button of the charcoal filter hatch, under the control
panel.
3
Insert the charcoal filter (EuroCave label facing you) located in the
"accessories"box, taking care to first remove the protective plastic.
N.B.: Only use genuine EuroCave parts.
II. Setting the feet and installing the covers
The distance between the centre of the cabinet feet is 515 x 748 mm.
N.B.: Setting the feet and fitting the covers must be carried out by a EuroCave installer.
10
EN
4/ INSTALLING YOUR WINE CABINET
•
When used for the first time, the charcoal filter alarm will display. Reset
the filter meter to 365 (see chapter 6, § VI).
Door security
In order to secure your cabinet, the Royale wine cabinet is fitted with a lock.
2
The hatch willopen.
4
Push the hatch upwards and screw the button back on.