Advertenties
Beschikbare talen
Beschikbare talen
Programming additional transmitters
In addition to the master transmitter, up to 15 further trans-
mitters can be programmed in the radio socket.
Press the programmed master transmitter's programming button for 3
seconds.
▻ The LED on the radio socket flashes briefly once to confirm.
Now press the programming button of a new transmitter which has not yet
been programmed in the radio socket for 3 seconds. Doing so activates the
radio socket's programming mode for a new transmitter for 3 minutes.
▻ The LED on the radio socket flashes briefly once to confirm.
Now re-press the programming button of the new transmitter you wish to pro-
gram for 3 seconds.
▻ The LED on the radio socket flashes briefly twice to confirm.
► The new transmitter has now been programmed.
Deleting transmitters
The programmed master transmitter cannot be deleted. It
can only be overwritten (see Overwriting the master trans-
mitter).
Press the programming button on the master transmitter for 3 seconds.
▻ The LED on the radio socket flashes briefly once to confirm.
Re-press the programming button on the master transmitter for 3 seconds.
▻ The LED on the radio socket flashes briefly once to confirm.
Re-press the programming button on the master transmitter for 10 seconds.
▻ The LED on the radio socket flashes briefly twice to confirm.
► All transmitters (except the master transmitter) have been deleted from
the receiver.
20 - en
Advertenties
Hoofdstukken
