Advertenties
Beschikbare talen
Beschikbare talen
1.
Disconnect the consumer from the power supply (pull the mains plug).
2.
Connect the 2-core floating switching contact connecting cable (pulse
output) to the pulse input provided for this purpose on the device to be
controlled.
3.
Plug the radio socket into the 230 V mains socket nearest the consumer.
4.
Now plug the consumer's mains plug into the radio socket.
The consumer is now ready for manual operation using the
radio socket's control button.
Programming the transmitter
Putting the radio socket into programming mode
1.
Plug the radio socket into the 230 V mains socket nearest the consumer.
2.
The radio socket goes into programming mode for 3 minutes.
Programming the master transmitter
The master transmitter refers to the very first transmitter
programmed in a receiver. In contrast to subsequently pro-
grammed transmitters, the master transmitter enables,
among other things, the setting of limit positions (for drives
with integrated radio receiver) and the programming or de-
leting of further transmitters.
If a master transmitter is already programmed in the re-
ceiver, press the programming button on the transmitter for
10 seconds.
When in programming mode, press the transmitter's programming button until
the LED on the VC180 flashes briefly twice to confirm programming.
► Programming is now complete.
Switch on the consumer manually.
Assembly
19 - en
Advertenties
Hoofdstukken
