Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
V. Door reversibility
x3
x3
x3
x4
A
B
C
D
E
F
G
This allows you to change its direction of opening. Proceed as follows (example for changing a right-hand door to a left-hand door):
1
Unscrew the three screws using a"T25" Torx wrench.
2
Remove the upper hinge.
3
Carefully remove the caps using a thin blade.
4
Remove the cabinet door by opening it slightly, then lifting it
upwards.
1
4
5
Unscrew the door pin.
6
Carefully remove the caps using a thin blade and replace with
the pin.
Reposition the cap on the opposite side.
6
N.B.: the glass door is very heavy. Take all necessary
precautions to ensure that you do not injure yourself
or drop it.
9
A
F
Upper hinge
Door catch
B
G
Caps
Lower hinge
C
H
Caps
Door pin
H
J
D
J
Torx screw
Door pin cap
E
Screw
7
Turn the door through 180°.
8
Put the door back onto its pin.
7
2
3
9
Put in place the upper hinge.
10
Screw the hinge so that the door is completely parallel to the
cabinet. Check that the seal adheres firmly to the cabinet
(by closing the door), to ensure it is completely airtight.
11
Put in place the caps.
11
5
10
9
6- Loading and layout advice
We strongly recommend that you do not leave your wine bottles:
- Wrapped in tissue paper inside your EuroCave wine cabinet. Tissue paper does not tolerate ambient humidity in
the long-term. The saturated paper will stick to your bottle labels and damage them.
- Stored in cardboard packaging or a wooden case in your EuroCave wine cabinet, in order to encourage maximum
air flow around the bottles and prevent the packaging from deteriorating, which could eventually contaminate your
wine bottles.
Each shelf can be used as a storage, sliding or display shelf. The shelves of your cabinet have 8 recesses allowing you to store your bottles
in complete safety.
1
2
3
N.B.: 10 locking dowels are provided in the accessories bag.
Layout of a shelf in storage version:
To install bottles on a storage shelf, proceed as follows:
Diagram 2
Diagram 1
Schéma 1
1
Insert 2 guides in the shelf support strips provided. For each
shelf, position a guide on the right and a guide on the left (see
diagram 1). Ensure that you securely clip the guides into their
slot (see diagram 2).
2
Place the shelf in the 2 guides (see diagram 3).
Diagram 3
1
Guides (x2)
2
Shelf – 8 recesses
3
Dowels (x2)
3
Place a locking dowel in each of the 2 holes located at the
front of the shelf, on the upper section. These dowels then fix
the shelf with respect to the guide and prevent any unwanted
movement of the shelf.
4
Start by placing the bottles in each recess of the back row,
with the base of the bottle towards the back.
5
Continue with the front row, putting the bottles in the
opposite direction.
6
Continue stacking the bottles, taking care to ensure that none
of the bottles touches the back wall.
Bottle capacity
in this storage layout
30 traditional Bordeaux bottles
maximum
EN
10
Advertenties
Hoofdstukken
Inhoudsopgave
