Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Rapid battery charger
Input:
Rated voltage:
Rated frequency:
Rated power:
Output:
Rated voltage:
Charging current:
Protection class:
Fuse (internal):
*
Battery and rapid battery charger are not
included
Charging time:
Battery type PAP 20 A1, 2 .0 Ah
¾
(available separately): 45 minutes
Battery type PAP 20 A3, 4 .0 Ah
¾
(available separately): 60 minutes
Recommended ambient temperature:
While charging:
During operation:
During storage:
Noise emission value
The measured values have been determined in
accordance with EN 62841 . The A-rated noise
level of the power tool is typically as follows:
Sound pressure level L
pA
Uncertainty K
:
pA
Sound power level L
:
WA
Uncertainty K
:
WA
Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN 62841:
Sanding:
Vibration emission value a
Uncertainty K:
m
WARNING!
Wear ear protection!
26 GB/IE
PLG 20 B1 *
230–240 V∼
50 Hz
120 W
21 .5 V
4 .5 A
II /
3 .15 A /
+4 to +40 °C
+4 to +40 °C
+20 to +26 °C
:
76 .2 dB(A)
3 dB
87 .2 dB(A)
3 dB
:
3 .72 m/s
2
h
1 .5 m/s
2
NOTE
The declared vibration total value and
u
the declared noise emission value have
been measured in accordance with a
standard test method and may be used for
comparing one tool with another .
The declared total vibration value and the
u
declared noise emission value may also
be used for a preliminary assessment of
exposure .
m
WARNING!
The vibration and noise emissions during
u
actual use of the power tool can differ
from the declared values depending on
the manner in which the tool is used,
especially what kind of workpiece is
processed .
Try to minimise exposure to vibration and
noise . Examples of measures to reduce
vibration include wearing gloves when
using the tool and limiting working time . All
parts of the operating cycle must be taken
into account (e .g . times when the power
tool is switched off and when it is running
idle in addition to the trigger time) .
Advertenties
Hoofdstukken
Inhoudsopgave
