Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ST120 Back Pane introduction
1. Wireless microphone antenna
2. Power input socket
3. Green color difference
4. Front right
5. Blue color difference
6. Front left
7. Red color difference
8. Coaxial digital output
9. Video output
System connection
CAUTION
(This player has no inside DTS decoder, if you play the disc with pure DTS, Analog output
terminal of the player will has no sound, you must press the setup key on the remote controller
to select audio for SPDIF/SOURCE Code, then recover sound by digital decode power amplifier
or digital decoder; if you play the disc with two format for DTS or Dolby AC-3, when there is no
sound output, you can press language key to convert to Dolby status).
Before finishing the connection, please do not pull on power plug.
Connection with TV set (AV input)
There is one set of AV cable in the standard packing
Connect the AV output terminal of this player with AV input terminal of Tv set (Video:
yellow jack)
Connect the mix audio output terminal of this player with audio input terminal of TV set
(left sound channel: white, and right sound channel: red)
Please refer to the relevant TV use manual when connecting.
When there is no AV port on your TV, please connect the outdoor radio frequency box
with this player's RF interface and TV antenna build-in end. And you can adjust the
channel and frequency rangelo make sure the image and voice to reach the best state.
When you are watching the disc in the different mode, please adjust this DVD player into
the relevant mode (PAL, PAL60, NTSC and AUTO)
10. S-video terminal
11. Optical output
12. Wireless MIC/FM antenna
13. Fan
14. Outdoor battery input
15. Outdoor speaker box terminal
16. Aux input, output
17. VGA Output
Advertenties
Inhoudsopgave
