Advertenties
Beschikbare talen
Beschikbare talen
en
Service programmes
Cleaning
Takes about 5 minutes�
■ Press button E�
■ Turn the rotary selector to select "Clean"�
■ Press button C� Display indi-
cates progress of the programme�
■ Clean the beverage outlet and replace,
empty the drip trays and replace�
■ Open the ground coffee drawer, drop in
a cleaning tablet and close the coffee
drawer again�
■ Close the appliance door�
■ Place a container with a capacity of
0�5 litre under the beverage outlet�
■ Press button C� The cleaning
programme will now run for about
5 minutes�
■ Remove the container, empty the drip
trays, replace and close the appliance
door�
■ Press C� The appliance has
finished cleaning and is ready for use
again�
■ Press E to exit the program�
calc'nClean
Takes about 26 minutes�
calc'nClean combines the functions Descale
and Clean� If both programmes are due
to be carried out close together, the fully
automatic coffee machine will automatically
suggest this service programme�
■ Press button E�
■ Turn the rotary selector to select
"calc'nClean"�
■ Press button C� The display
indicates the progress of the programme�
■ Clean the beverage outlet and replace,
empty the drip trays and replace�
■ Open the ground coffee drawer, drop in
a cleaning tablet and close the coffee
drawer again�
■ Remove the water filter (if there is one)
and press C
■ Pour lukewarm water into the empty
water tank up to the "0�5 l" mark and then
dissolve one Siemens descaling tablet
TZ80002N in it�
56
F
If there is not enough descaling
solution in the water tank, you will
be asked to do the following. Refill
using uncarbonated water and press
C again�
■ Remove the suction pipe from milk
container, wipe it and insert the end of the
suction pipe into the hole on the coffee
grounds container�
■ Close the appliance door�
■ Place a container with a capacity of
0�5 litre under the beverage outlet�
■ Press button C�
The programme will now run for about
19 minutes�
■ Remove the container and press
C�
■ Rinse the water tank and (if removed)
replace the water filter.
■ Fill the tank with fresh water up to the
"max" indicator�
■ Replace the water tank and close the
door�
■ Place the container underneath the
beverage outlet again�
■ Press button C�
The programme will now run for about
7 minutes and rinse the appliance�
■ Remove the container, empty the drip
trays, replace and close the appliance
door�
■ Press C� The appliance is des-
caled, cleaned and ready for use again�
■ Press E to exit the program�
Special rinsing
F
Important: If any of the service
programmes is ever interrupted, for
instance by a power failure, please
proceed according to the information
on the display:
■ Rinse the water tank and refill it with fresh
water up to the "max" mark�
■ Press button C� The pro-
gramme will now run for about 2 minutes
and rinse the appliance�
Advertenties
