Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5.Product Maintenance
5.1 Cleaning cloth
Please flip the machine body flat and remove the wiping cloth. Place the
cloth in cold water, add a small amount of detergent for cleaning, clean
with water, and then air dry. Figure
(Remember. Do not use bleach; do not dry, do not dry clean. Do not use a
completely wet cloth to clean glass windows, as this may cause the machine
to become stuck and slippery on the glass surface due to excessive moisture
adsorption.)
Figure
Cleaning cloth
①
5.2 Fan maintenance
Please turn the machine body over and lay it flat, and use a clean and dry
cloth to wipe away dust and other dirt from the bottom of the body.
Figure
②
5.3 Rolling brush maintenance
After each cleaning of the machine,
remove the rolling brush cloth on both
sides, clean the surface cloth with tap
water (do not flush water into the
inside of the rolling brush), and finally
air dry the rolling brush cloth
Disassembly method:
A. Place the machine flat on the table
and use a cross screwdriver to
unscrew the screws counterclockwise.
B. Gently break open the nearby buckle
with your hand to remove it, and separate the roller brush and buckle separately.
C. Install the clean roller brush onto the buckle, and connect the other
end of the roller brush with the machine bearing through 6 holes. Gently
push it inward and then swing the buckle to fix it in the machine slot. It is
best to tighten the screws.
D. The disassembly/assembly method for both roller brushes is the same.
①
Figure
9
Cleaning fan
②
③
Advertenties
Inhoudsopgave
