Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. Installation instructions
3.1 Conecting the safety rope
A. It is required to check the safety rope in the lower left comer of the
machine, ensure that the knot is stable, and check whether the safety
rope and hardware buckle are damaged. (Figure 1)
B. Secure the hardware buckle on the other end of the safety rope to
other sturdy objects inside the room, ensuring that it is wrapped
several times to prevent it from falling off. (Figure 2)
3.2 Install the wiping cloth
A. Properly apply the cloth to the bottom of the product body, paying
attention to the direction, ensuring that it is not installed upside down,
and not blocking the drive wheel and barometer sensor. (Figure 3)
B. It is required to press the cloth in all directions with your hand. The
cloth must be tightly attached to the Velcro on the body, and the four
corners of the cloth must be flattened. The cloth must be installed in the
machine slot, kept flat, and the cloth must not be too wet.
C. Check if the belt is clean.
③
①
②
5
,
Advertenties
Inhoudsopgave
